About Our Factory
As a energetic and innovative manufacturer, Superhouse has developed our own window system-SP100 series with Australia architect, which are comparable with Australian leading window systems, widely used in large commercial and residential buildings in Sydney, Melbourne and Perth.
This year, our new factory opened. Annual production capability reaches 100,000 square meters of windows, and 55% are exported to Australia, 45% to USA, Canada and other developed countries. Our company has always focused on research, development and innovation, recently we have developed bullet proof windows.
Superhouse people also have continuously tried to improve product quality, introducing European high-end system to serve customer who pursue ultimate energy saving and sound insulation purpose. Our company regards “Quality is our culture” as our tenet. We hope to cooperate with more customers for mutual development and benefits.
We welcome all potential buyers to contact us. Our trade assurance service will provide your business with full protection for product quality and on-time shipment.
Special Aluminium aluminium vented exterior door with Chinese Best workmanship
WhatsApp:+86 13811929303
Each column has many diffirent options and customer could combine the way he like to customize his own personalized aluminium vented exterior door .
Profiles |
|
Glass |
|
Hardware |
|
Mesh |
|
Finish |
|
Superhouse is a company with full of life and with 10-year experience on aluminium windows & doors' manufacturing in Shanghai China. We have veteran with exquisite workmanship for every doors and windows we make, to serve your house for more than 30 years' longevity.
We are one of the few that have the official approved certification for Australian standard AS2047. The license number is SMK40350. Currently, there are many suppliers in China that use fake credentials to pass themselves off as Asutralian approved. Please pay attention to the authenticity of a company, and make sure to check company credentials.
Please check the license NO. on http://register.saiglobal.com/default.aspx?stype=power to confirm the authenticity!
All of our products are packed as following steps.
We use Iron Pallet instead of wooden pallet, stronger and more stable.
Step 1. Corners are protected by cardboard to avoid collision damage;
Step 2. Frames are wrapped with protective tapes to avoid scratching;
Step 3. Fix windows and doors on iron pallets by metal fixed strip;
Step 4. Reinforce windows & doors with plastic belts;
Step 5. PE films cover to keep the moisture away;
Step 6. Tie up iron pallets in container with durable plastic belts;
Step 7. Fill the space between pallets with air bags to insure the stable.
With full protection the our products can arrive at your job sites in safe and sound.
Shipping port: Shanghai port.
Delivery Time: 15-38 days sinve the order confirmation.
Projects: |
1. http://www.b1tower.com/ 2. http://geneaangola.com/empreendimentos.php?s=2&emp=6 |
Preject A: One 28 levels building,the highest building in Parramatta Sydney at present, including shopping mall,fitness club and residential. Project B: One 6 levels building,located in Luanda,the capital of Angola,it has shopping mall and offices |
We provide professional suggestions on profile and glazing adoption if you are the first time to purchase windows or doors. Diffirent regions have diffirent climatic characters, and the treatment on profile or glazing should be diffirent to meet its diversity, it concerns the longevity of windows or doors, and each function of erergy absorbing & saving .
Superhouse products have 10 years quality guarantee. Once you got a problem window or door during the warranty period, contact the local Superhouse store for exchanging a new.
Here are some frequent questions that customers asked while purchasing the windows & doors, hope the answers could help you to have your right eyes for your house!
1. What is spectrally selective glazing?
A coated or tinted glazing with optical properties that is transparent to some wavelengths of energy and reflective to others. Typical spectrally selective coatings are transparent to visible light and reflect short-wave and long-wave infrared radiation.
2. What is insulated glass?
This term applies to two or more panes of glass separated by insulation at the edges and air in the centre to provide greater thermal efficiency to a window.
3. What is gas filled glass?
An inert gas, usually argon, is sealed between the panes of glass in a window instead of air. Gas is a better insulator than air, increasing the thermal value of the window.
4. What is AS2047?
It is the mandatory minimum specification for windows and doors used in Australia it includes compliance to the Glass Standard AS 1288.
The following performance tests are undertaken to verify product performance claims.
-AS 4420.2 Deflection Test - positive and negative wind pressures are applied to the face of the window to test the maximum deflection under wind load.
-AS 4420.3 Operating Force Test - to verify that an opening sash is capable of opening and closing without undue effort.
-AS 4420.4 Air Infiltration Test - the air leakage of a window is tested to ensure energy and acoustic efficiency.
-AS 4420.5 Water Penetration Resistance Test - this test is designed to ensure no water leaks through the window into the building.
-AS 4420.6 Ultimate Strength Test - negative and positive wind pressures are applied to the window to at least 1.5 times the design wind pressure to ensure it does not fail in unusual wind conditions.
- Superhouse exterior door offers high performance, durable craftsmanship and versatile aesthetic options.
FAQs
Q: What is your main product?
A: We can supply the window system (including profile, hardware, accessories, glass) or the finished products ready for installation.
Q: How can I know your price?
A: The pricing is based on the buyer's specific requirement, so please provide the below information to help us quote the exact price to you.
- Shop drawing/window schedule to show the window dimensions, quantity, and type;
- Frame color;
- Type of glass and thickness (single or double or laminated or others) and color (clear, tinted, reflective, Low-E or others, with Argon or without).
Q: What is the standard size of your windows and doors?
A: Our product is CUSTOMER MADE. We always manufacture windows and doors according to the buyer's dimensions.
Q: What is your delivery time?
A: 38 days after deposit and drawing confirmed
Q: What is your standard color for aluminum frames?
A: Powder coating (Frost black and Sliver grey)
Q: What are your payment terms?
A: Normally, 30% - 50% of total amount by T/T as deposit and balance before delivery. Irrevocable L/C at sight is also acceptable.
Q: Whether we need to install the glass (onsite glazed), or do your windows come with the glass installed?
A: We will install glass at the factory based on windows/doors dimensions to ensure they can be safe during transportation and easy for our buyer to install the whole windows/doors. Install glass on site is recommended for big-sized products.
Q: What is your warranty? What do we do in case of problems?
A:10 years quality warranty is provided, including frame unfading nor peel-off, hardware, and accessories working properly under correct operation. 10-year warranty for German hardware. In case of our quality problem, we will provide a replacement by international courier. Immediate delivery of replacement parts if available in stock, and if not in stock, the time would depend on material ordering time, usually 10-15 days.
Q: What kind of service will you provide?
A: We can provide the engineering & supervising service to guide the installation of our windows and doors.
Q: Are your products Certificated?
A: Yes, our products meet the Australian standard for now and also we will make our product tested and certificated if you required
Q: Is there a price difference between powder coating and anodizing?
A: No.
Q: What is spectrally selective glazing?
A: Coated or tinted glazing with optical properties that are transparent to some wavelengths of energy and reflective to others. Typical spectrally selective coatings are transparent to visible light and reflect short-wave and long-wave infrared radiation.